View Full Version : Mark is the man
AutomagicLS1
2008-02-21, 03:17 PM
Great work and stands by it, will go out of his way to help out anyone. He did my car last year and I had a problem at the dyno map sensor came out and would not seal back up and the car wouldnt start. Had to have it towed from grain valley at vamp to a friends in raytown. Mark drove all the way out from Lawrence to Raytown and helped get the car back running on a COLD night- dark driveway at 10-11pm at night. :headbang: Go see him about getting work done :thumbsup:
LS1KILR
2008-02-21, 03:58 PM
:cheers: :cheers:
skinnies
2008-02-21, 04:16 PM
I'll agree with Mark going out of his way to help someone, we spent two days straight going over my entire wiring harness with me and testing to try to figure out why my "BUILT" 4l60e wouldn't work last year. We also swapped out numerous internal parts per the transmission builder from the east coast, only to find out it was something wrong with the build so I had to send the transmission back, luckily I got a full refund. Mark quickly called a friend and found me a th400 with a NICE coan converter from someone he knew for a really good price. I bought a crossmember and we swapped in the th400 on his lift a few days later and it went in as smooth as can be. :yesnod: This was all a GREAT help because I was living in my apartment at the time and didn't have anywhere to work on the car. :yesnod:
six bolt
2008-02-21, 05:03 PM
:worship: :headbang:
volksmech
2008-02-21, 05:07 PM
have only heard good things about the man. nece to see you are a sponsor on here :headbang:
91stockdb1
2008-02-21, 09:22 PM
:wstupid:
stanger05
2008-02-21, 11:25 PM
Hey mark glad to see you doing so well! Business will be good for you. Keep up the good work. :thumbsup: :yesnod:
SloNLow
2008-02-22, 01:55 AM
came from lawrence to lenexa. to my house to help with the v8 s10 project. very nice guy. bad luck though. when he came over i found out i had 8 bent push rods lol
1slohoe
2008-02-22, 02:49 AM
good luck with the new shop :cheers:
Buford
2008-02-22, 04:37 AM
He will be helping me out with my suspension setup :headbang:
Glad to see him as a sponsor as well.
69Fury
2008-02-22, 07:35 PM
mark is the man tru dat! :headbang:
BIGT94z
2008-02-23, 01:51 AM
heard alot of good things and im glad ur a sponsor now :headbang:
I'll agree with Mark going out of his way to help someone, we spent two days straight going over my entire wiring harness with me and testing to try to figure out why my "BUILT" 4l60e wouldn't work last year. We also swapped out numerous internal parts per the transmission builder from the east coast, only to find out it was something wrong with the build so I had to send the transmission back, luckily I got a full refund. Mark quickly called a friend and found me a th400 with a NICE coan converter from someone he knew for a really good price. I bought a crossmember and we swapped in the th400 on his lift a few days later and it went in as smooth as can be. :yesnod: This was all a GREAT help because I was living in my apartment at the time and didn't have anywhere to work on the car. :yesnod:
those were good times. i came by for like 30 minutes one of those days you were ripping apart the wiring arness. took one look at what you all were doing and said FUCK THAT!
Mark is the fucking man though. he has worked on at least my last 5 cars. all good quality work and if i ever had any issues he was more than happy to go out of his way to fix them.
ksstang
2008-02-23, 05:59 PM
I 100% agree with everything everyone has said about Mark! Great guy!!! Really knows his stuff and will help anyone with a problem! Hope business treats you well!! As soon as the mustang is done... I'll forsure be giving Mark by business on the dyno!!
Kyle
MaxxMitchell
2008-02-23, 11:41 PM
:wave: Proud customer, man know his chassy/suspension/tire set ups :thumbsup:
Henry
2008-02-24, 04:53 AM
:headbang: :thumbsup: :patriot:
carlos64030
2008-02-24, 12:33 PM
Hmmmm.... unfortunately I don't believe I've met this person. Since everyone speaks so highly of him though, I'll look in to having him do a cam and head swap on Raven for me since I no longer have the time to do it myself. Where is his shop located? Lawrence?
69Fury
2008-02-24, 01:09 PM
Hmmmm.... unfortunately I don't believe I've met this person. Since everyone speaks so highly of him though, I'll look in to having him do a cam and head swap on Raven for me since I no longer have the time to do it myself. Where is his shop located? Lawrence?
pull into lawrence on k10 and the shop is on the southwest corner of the second intersection. (23rd and Haskell) next to allied(?) glass.
carlos64030
2008-02-24, 01:15 PM
Hmmmm.... unfortunately I don't believe I've met this person. Since everyone speaks so highly of him though, I'll look in to having him do a cam and head swap on Raven for me since I no longer have the time to do it myself. Where is his shop located? Lawrence?
pull into lawrence on k10 and the shop is on the southwest corner of the second intersection. (23rd and Haskell) next to allied(?) glass.
Kewl :thumbsup:
02ws6_ta
2008-02-24, 01:42 PM
Just droped the car off for some work... Shop looks better everytime i go in their dyno looks awsome too :headbang:
Hmmmm.... unfortunately I don't believe I've met this person. Since everyone speaks so highly of him though, I'll look in to having him do a cam and head swap on Raven for me since I no longer have the time to do it myself. Where is his shop located? Lawrence?
where have you been carlos? i think he is getting tuning software for LT1's as well (he may already have it im not sure). but get that thing in there!
I'll agree with Mark going out of his way to help someone, we spent two days straight going over my entire wiring harness with me and testing to try to figure out why my "BUILT" 4l60e wouldn't work last year. We also swapped out numerous internal parts per the transmission builder from the east coast, only to find out it was something wrong with the build so I had to send the transmission back, luckily I got a full refund. Mark quickly called a friend and found me a th400 with a NICE coan converter from someone he knew for a really good price. I bought a crossmember and we swapped in the th400 on his lift a few days later and it went in as smooth as can be. :yesnod: This was all a GREAT help because I was living in my apartment at the time and didn't have anywhere to work on the car. :yesnod:Who was it that built that tranny. I am over 10K miles on this one from Gear star transmissions and Yank convertors (paired combo). As far as 4L60E goes there is nothing else you can do to one including converting to a 4L65E that hasn't been done to mine and it is holding up nicely. :thumbsup:
BoDarville
2008-11-24, 12:53 PM
Hmmmm.... unfortunately I don't believe I've met this person. Since everyone speaks so highly of him though, I'll look in to having him do a cam and head swap on Raven for me since I no longer have the time to do it myself. Where is his shop located? Lawrence?
I trusted Mark with my T/A :thumbsup: :yesnod:
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.