10# NANO Nitrous Kits Slightly Used on test bench w/pics!!

[nano]

- We have 4 10# NANO nitrous kits that were used on our flow bench never installed into a car.

We are selling what you see in the picture. They are complete 10# Universal NANO Systems. Normally sell for $569.

We are asking $499 obo.

The below dyno sheet was a comparison of the NANO kit and a standard nitrous kit. The car picked up 24 rwhp with our system and made the same hp all 3 back to back runs. As you can see the stock nitrous system was all over the place and made less power with the bigger jet.

Here is a link to GM high tech with a 7 page article on the system. It picked up 47rwhp on a ls1 with a 300 shot.


http://www.gmhightechperformance.com/tech/0803gmhtp_nitrous_oxide_regulation_system_nitrous_ pressure_games/index.html


http://i55.photobucket.com/albums/g135/stanger05/10Universalparts.jpg
http://i55.photobucket.com/albums/g135/stanger05/10UniversalBox.jpg
http://i55.photobucket.com/albums/g135/stanger05/NANO10UniversalKit.jpg
http://i55.photobucket.com/albums/g135/stanger05/ryancoddington.jpg
http://i55.photobucket.com/albums/g135/stanger05/DSC05911.jpg
http://i55.photobucket.com/albums/g135/stanger05/MosComparisonDynoSheets2-1.jpg

[fstfords]

I was thinking about putting the #10 universal kit on my car,I have 2 nx bottles do i need any other valves or fittings for the second bottle? thanks

[stanger05]

pm'd

[JoeyG]

Think it would fit? :lol2:
Bottle and bracket are mocked in place.

http://www.ls1tech.com/forums/attachment.php?attachmentid=143159&d=1218382961

[stanger05]

Think it would fit? :lol2:
Bottle and bracket are mocked in place.

http://www.ls1tech.com/forums/attachment.php?attachmentid=143159&d=1218382961
You can get a 12'', 18'', and 24'' lines to go with the system. You could put it behind the roll bar. . You could bring it up to lawrence for fitment :yesnod:

[JoeyG]

Think it would fit? :lol2:
Bottle and bracket are mocked in place.

http://www.ls1tech.com/forums/attachment.php?attachmentid=143159&d=1218382961
You can get a 12'', 18'', and 24'' lines to go with the system. You could put it behind the roll bar. . You could bring it up to lawrence for fitment :yesnod:

I'll try to swing by sometime. Behind the rollbar isn't an option. :nonod: Thats why the nitrous bottle is mounted where it is. :lol2:

[stanger05]

Think it would fit? :lol2:
Bottle and bracket are mocked in place.

http://www.ls1tech.com/forums/attachment.php?attachmentid=143159&d=1218382961
You can get a 12'', 18'', and 24'' lines to go with the system. You could put it behind the roll bar. . You could bring it up to lawrence for fitment :yesnod:

I'll try to swing by sometime. Behind the rollbar isn't an option. :nonod: Thats why the nitrous bottle is mounted where it is. :lol2:

Well i saw your car in person this week. I understand why it cant go there now for sure. Hopefully what we discussed works out :thumbsup:

Your car/trailer was a very nice setup at drag week. :headbang:

[JoeyG]

Think it would fit? :lol2:
Bottle and bracket are mocked in place.

http://www.ls1tech.com/forums/attachment.php?attachmentid=143159&d=1218382961
You can get a 12'', 18'', and 24'' lines to go with the system. You could put it behind the roll bar. . You could bring it up to lawrence for fitment :yesnod:

I'll try to swing by sometime. Behind the rollbar isn't an option. :nonod: Thats why the nitrous bottle is mounted where it is. :lol2:

Well i saw your car in person this week. I understand why it cant go there now for sure. Hopefully what we discussed works out :thumbsup:

Your car/trailer was a very nice setup at drag week. :headbang:

:worship: Thank you for the compliment.

I think the 10lb system will work for me. I just need to get rid of the 2 bottle heater kits I have currently though. :lol2: