PDA

View Full Version : b series parts


LS-V DA-9
2009-01-29, 04:03 PM
b18a1-bottom end bearing kit
DA motor mount and shift linkage inserts
YS1 axel oil seals for the trans, and inner tie rod boot
b18c1- injector o rings(4)
20% tint on DA front windows just the tint

kcevo
2009-01-30, 12:09 AM
On the bearings, are you looking for OEM color coded bearings or an aftermarket like ACL's?

OEM Headgasket in 81mm correct, not 81.5mm or bigger?

LS-V DA-9
2009-01-30, 12:20 AM
id like to go oem but if they are way pricey id go acl, and yes 81mm

kcevo
2009-01-30, 12:22 AM
id like to go oem but if they are way pricey id go acl, and yes 81mm

Quite a bit higher than ACL's, but I'll price both.

You need just the rod bearings or the whole set of rods/mains/thrust?

LS-V DA-9
2009-01-30, 12:24 AM
i was going to just do rods but gimme a full bearing set price

LS-V DA-9
2009-02-06, 02:41 AM
??

kcevo
2009-02-09, 11:58 AM
??

I didn't forget about ya. :thumbsup:

LS-V DA-9
2009-02-09, 01:27 PM
ok j/w

LS-V DA-9
2009-02-17, 09:43 PM
also how much for a stage 1 exedy clutch kit for a cable YS1 trans

LS-V DA-9
2009-02-27, 05:15 PM
evo u got a pm :thumbsup:

LS-V DA-9
2009-03-05, 03:56 PM
edit nvm

LS-V DA-9
2009-03-06, 02:07 AM
bump need prices please

LS-V DA-9
2009-03-07, 03:04 PM
ttt picked up some parts today

LS-V DA-9
2009-03-09, 12:20 AM
bump again need these parts have the money lmk

Tsi
2009-03-09, 02:03 PM
which parts are needing exactly?

im catching up on the tail end of this

LS-V DA-9
2009-03-09, 02:44 PM
i still need everything listed at the top i tok the stuff off ibought already

LS-V DA-9
2009-03-10, 11:45 PM
ttt i can get everything but the solenoid gasket bolts and oil pump here if you guys dont have it id like to help ur shop out lmk soon plz

LS-V DA-9
2009-03-13, 06:22 PM
ttt pmd kcevo

LS-V DA-9
2009-03-14, 07:21 PM
bump bump bump still no quotes?????

Red_Rocket
2009-03-14, 07:39 PM
bump bump bump still no quotes?????They are busy and can't jump on here every second like you.

They do have a phone :thumbsup:

LS-V DA-9
2009-03-14, 08:20 PM
bump bump bump still no quotes?????They are busy and can't jump on here every second like you.

They do have a phone :thumbsup:
really??? i know ive had this posted for a while and i know evo has alot of shit goin on im just wanting my quotes and if the price is good ill drive to kc to get them if not ill get it somewhere else i am just bumping it to get there attention thanks

LS-V DA-9
2009-03-16, 04:29 PM
called the shop waiting 4 a call back thx :thumbsup:

LS-V DA-9
2009-03-19, 12:05 AM
tsi m returned i can definately be ther by monday or tues to get that pm me u or evo n lmk when u get them

LS-V DA-9
2009-03-20, 02:36 AM
bump updated lemme no when u have them so i can come up :thumbsup:

LS-V DA-9
2009-03-21, 08:21 PM
need these wuick im getting my trans monday hopefully lmk

LS-V DA-9
2009-03-22, 09:01 PM
coming this week need to know if you have them or not ill give u a cal tomorrow if no reply :thumbsup:

ItalionStallion888
2009-03-24, 05:19 PM
jesus christ, stalker x girlfriend for parts here

I love you
bump
I hate you
bump
I love you
bump

LS-V DA-9
2009-03-24, 08:28 PM
do u have a problem with me or what im gettin really tired of ur smart ass attitude and comments stay off my posts unless ur going to be helpful

ItalionStallion888
2009-03-24, 10:29 PM
do u have a problem with me or what im gettin really tired of ur smart ass attitude and comments stay off my posts unless ur going to be helpful

and then.....?

LS-V DA-9
2009-03-24, 10:30 PM
do u have a problem with me or what im gettin really tired of ur smart ass attitude and comments stay off my posts unless ur going to be helpful

and then.....?
ha ha omg ur so funny shut the fuck up

ItalionStallion888
2009-03-24, 10:33 PM
do u have a problem with me or what im gettin really tired of ur smart ass attitude and comments stay off my posts unless ur going to be helpful

and then.....?
ha ha omg ur so funny shut the fuck up

dont really have to, you are pretty easy to troll.

LS-V DA-9
2009-03-24, 10:53 PM
blah blah blah ur a dirty tramp :thumbsup:

ItalionStallion888
2009-03-25, 07:31 AM
blah blah blah ur a dirty tramp :thumbsup:

dirty tramp, really are we at recess on the playground right now?

LS-V DA-9
2009-03-25, 07:34 AM
:yesnod:

LS-V DA-9
2009-03-30, 10:09 PM
pmd and no replies

kcevo
2009-03-30, 10:21 PM
pmd and no replies

Man you have talked to me, you have talked to Bryan, you have talked to Ryan.

We have given you a price and availability on what you need.

What else do you want?

LS-V DA-9
2009-03-30, 10:23 PM
pmd and as i said in it i was wondering how long it would take for the parts to get there if i paid, or could you have them there before i come thata way i dont have to waste a whole day drivin around KC. evverytime i ask that i never get a reply. i just want to know what way we are going to do this

kcevo
2009-03-30, 10:43 PM
Give us a call tomorrow, and talk with Bryan or Ryan.

We will get you taken care of.

If you have the exact part numbers for all the parts you want, inlcuding the new ones that would be even better. Last I checked on the parts you wanted everything was in stock in KC.

LS-V DA-9
2009-03-30, 10:53 PM
ya i just was wondering how long it would take for you guys to pick up the parts since they are at different places

Tsi
2009-03-31, 03:35 PM
bushings are here.
acl race main bearings is all we have right now. those are 60.

rod bearings we don't have, and can not get. so your call on that one

LS-V DA-9
2009-03-31, 04:13 PM
bushings are here.
acl race main bearings is all we have right now. those are 60.

rod bearings we don't have, and can not get. so your call on that one

its ok i found a full kit dont worry about it, ad i ca get the tie rod boot here so what i need from you guys is
b18a1-bottom end bearing kit
DA motor mount and shift linkage inserts, front 2 door window tint 20%(just the tint)
YS1 axel oil seals for the trans
b18c1- injector o rings(4)
you have all that?

BoostedM3@ModifiedbyKC
2009-03-31, 05:35 PM
bushings are here.
acl race main bearings is all we have right now. those are 60.

rod bearings we don't have, and can not get. so your call on that one

its ok i found a full kit dont worry about it, ad i ca get the tie rod boot here so what i need from you guys is
b18a1-bottom end bearing kit
DA motor mount and shift linkage inserts, front 2 door window tint 20%(just the tint)
YS1 axel oil seals for the trans
b18c1- injector o rings(4)
you have all that?

Everything but the rod bearings are in stock...
Including your scrap tint too...

LS-V DA-9
2009-03-31, 05:58 PM
do u no the cost of the tint?

Red_Rocket
2009-03-31, 06:08 PM
do u no the cost of the tint? :banghead:
FUCKING CALL THEM ARE YOU KIDDING ME DO YOU NOT HAVE A FUCKING PHONE :doh:

YOU ARE THE MOST ANNOYING PERSON I HAVE SEEN TRYING TO GET PARTS.

IF YOU HAVE THE MOTHER FUCKING CASH WHY NOT JUST CALL THEM AND GET SOMETHING GOING RATHER THEN PLAYING THIS PM ME GAME

GOD YOU ARE A DUMB MOTHER FUCKER

YOU SIR FAIL AT LIFE :nopity:

Red_Rocket
2009-03-31, 06:10 PM
913 432-8468

THATS THE PHONE NUMBER RIGHT THERE YOU CAN'T MISS IT PLEASE GTFO HERE AND CALL THEM :banghead:

LS-V DA-9
2009-03-31, 06:15 PM
thank you asshole. ive called them already but didnt get the price on the tint. fuck u dude i dont care if u think im annoying or anything for that matter im not buying pars from u. i have called them 3 times just today so shut the fuck up, and if dude works there its the same fuckig thing

ItalionStallion888
2009-03-31, 07:17 PM
thank you asshole. ive called them already but didnt get the price on the tint. fuck u dude i dont care if u think im annoying or anything for that matter im not buying pars from u. i have called them 3 times just today so shut the fuck up, and if dude works there its the same fuckig thing

you called 3 times and whoring up on here :lol2:

Red_Rocket
2009-03-31, 07:24 PM
thank you asshole. ive called them already but didnt get the price on the tint. fuck u dude i dont care if u think im annoying or anything for that matter im not buying pars from u. i have called them 3 times just today so shut the fuck up, and if dude works there its the same fuckig thing

you called 3 times and whoring up on here :lol2: :wstupid:

Tsi
2009-03-31, 07:48 PM
scrap tint is set on scott himself on what he would want for it. if and when you come down here to pick up the parts, you can ask scott what he would sell it to you for.

NachO_SRT
2009-04-01, 08:15 AM
:yesnod: :yesnod: :yesnod:


http://2.bp.blogspot.com/_6IDK_OzQUjA/SaAooeO2usI/AAAAAAAAAx8/dwrR9c9VXw4/s400/norman%2Bbates.gif

LS-V DA-9
2009-04-01, 05:21 PM
:worship: thank you for the parts

BoostedM3@ModifiedbyKC
2009-04-01, 05:37 PM
:worship: thank you for the parts

No problem...just give us a shout if you need anything else in the future.
Hope everything that you needed works out well...greatly appreciated.
Thanks again. :cheers:

LS-V DA-9
2009-04-01, 11:04 PM
:worship: thank you for the parts

No problem...just give us a shout if you need anything else in the future.
Hope everything that you needed works out well...greatly appreciated.
Thanks again. :cheers:
for sure :thumbsup: