PDA

View Full Version : Bryan's Ford Mustang Cobra parts polished...photos inside...

TT_6SPD_95
2009-02-12, 11:52 AM
Good morning everyone,


For anyone interested we just finished up Bryan's Intake Manifold, Blower, Bracket, Piping, etc as far as the Metal Polishing (www.mirrorfinishpolishing.com) goes. Bryan will have all of these parts mounted in the engine compartment shortly and will send photos of how everything looks and at that point I will go ahead and post those photos as well.

For more Metal Polishing Photos and Info (www.mirrorfinishpolishing.com) visit the website: Click for Metal Polishing Photos, Information, etc (www.mirrorfinishpolishing.com)







Supercharger Bracket AFTER Metal Polishing Services (www.mirrorfinishpolishing.com)

http://www.mirrorfinishpolishing.com/PICTURES/POLISHING-PARTS/BRACKETS/CHROME-LIKE-POLISHING-BRACKETS-23.JPG




Supercharger Bracket AFTER Metal Polishing Services (www.mirrorfinishpolishing.com)

http://www.mirrorfinishpolishing.com/PICTURES/POLISHING-PARTS/BRACKETS/CHROME-LIKE-POLISHING-BRACKETS-24.JPG




Piping AFTER Metal Polishing Services (www.mirrorfinishpolishing.com)

http://www.mirrorfinishpolishing.com/PICTURES/POLISHING-PARTS/INTERCOOLER-PIPING/CHROME-LIKE-POLISHING-INTERCOOLER-SYSTEM-22.JPG




Valve AFTER Metal Polishing Services (www.mirrorfinishpolishing.com)

http://www.mirrorfinishpolishing.com/PICTURES/POLISHING-PARTS/BLOWERS/CHROME-LIKE-POLISHING-BLOWER-17.JPG




Valve AFTER Metal Polishing Services (www.mirrorfinishpolishing.com)

http://www.mirrorfinishpolishing.com/PICTURES/POLISHING-PARTS/BLOWERS/CHROME-LIKE-POLISHING-BLOWER-18.JPG
zdmustanggt
2009-04-30, 12:16 PM
Maybe try sanding down smooth by gradually stepping up to more fine grits before polishing. The end result will be much more mirror-like and have a clear reflection.
TT_6SPD_95
2009-04-30, 04:04 PM
Maybe try sanding down smooth by gradually stepping up to more fine grits before polishing. The end result will be much more mirror-like and have a clear reflection.


Thanks Zach...I just forgot to update this thread a while back with the new photos of the intake and bracket...these particular pieces were not all of the way finished at that point, but photos were posted of everything prematurely. We went back in one more time on those pieces before they were sent out and I will have to get the new photos up that were taken a while back. Once I get them on the server I will update the thread.



Thanks