PDA

View Full Version : FS: 1993 Honda Civic Coupe RHD Tulsa, OK


engear2005
2010-10-30, 11:21 AM
Well after a 3yr build time I am selling my work. Car has been daily driven for a year now. Runs good! Stroked H22 making 203hp and 169tq. Still gets 34mpg. Motor is pretty much stock still and running a factory mapped ecu. Car was built to drive everyday. Still has A/C and Cruise control. Car has about 12k miles on it since build.

1993 Honda Civic Coupe RHD

Exterior:
RHD Conversion (firewall swap)
S2k Side markers
New OEM Honda fenders
New OEM Honda Front and Rear Bumpers
New OEM Honda Hood
New OEM Honda Door and Quarter Glass
New PPG windshield (factory Honda without the Honda logo)
Power folding exterior mirrors
OEM Honda Stanley fogs (not cheap aftermarket)
New OEM EX lip
JDM bumper pole (that operates)
20% Tint
All New OEM moldings and seals
Black housing headlights with city lights
New OEM Rear wing
New OEM 4dr civic rear door hands (to delete key holes)
New JDM Thin Moldings
Ek painted side skirts
NRG Hood Shocks
All New OEM Honda Emblems (custom black chromed)
Engine bay wire tuck (custom ecu/ fuse bax plate in passenger floor)


Interior:
All black
96 Del Sol seats
Factory 6 disc CD Changer
JDM Audio Console
Honda Rear DVD system (player mounted in factory radio location)
New OEM Armrest Center Console
Velvet Door Panel, and Rear Panel inserts
Power windows with drivers auto up and down feature
OEM JDM Amber clock
Amber LED Dash lighting
Factory Sunroof
Factory Steering wheel to maintain cruise
Auto Climate Control System
Python Alarm
Custom Headliner for RHD Conversion

Suspension:
5-Lug setup
Integra Front Knuckles
ITR Front Rotors
Legend Twin Piston calipers
All New Energy Suspension bushings (front)
New wheel bearings (front and rear)
New hubs (front and rear)
SPC Front Camber Kit
Yonaka Full Coilover set
B16 Del Sol 24mm front sway bar set with all new hardware
Rear 10" RSX rotors and caliper brackets
Meagan racing rear upper camber kit
ITR rear sway bar set
SPC Rear Lower control arms
New Trailing Arms OEM Bushings
Braided Stainless and Clear protected brakelines each corner
Brakeline tuck
Rota Circuit 10's
S2k CR Black Lug Nuts and Locks

Engine: (new owner will get details) 203hp and 169tq
H22 stroked to a 2.4l
about 10.5:1-11:1 compression
New from Honda H22 head and cams
Removed balance shafts
crank balanced for removal of balance shafts
internal oil galley plugs to maintain oil pressure with removed shafts.
Hytech replica header
modified ITR b-pipe
Honda Factory Performance 06 SI muffler
Stock air box with pipe connecting to manifold
removed butterfly in intake manifold
unorthodox crank pulley (custom machined to one pulley)
Custom A/C and Alternator bracket (uses 96-00 D series compressor and alt) single belt
92 accord transmission (almost the same as H22, great cruising 5th gear)
Stock flywheel and New OEM Honda clutch set
Innovative Motor Mounts
Adjustable Cam Gears


Asking $9k best way to get a hold of me is email engear2005@yahoo.com

complete photo album http://www.facebook.com/#!/album.php?aid=5136&id=226601815

http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_0215.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_0218.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_0268.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_0413.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_0206.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/44524_419219664038_500149038_5035057_6942738_n.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/44524_419219649038_500149038_5035054_255401_n.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/39969_10150236553960462_755320461_14022223_5229108 _n.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_1260.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/IMG_1256.jpg
http://i153.photobucket.com/albums/s206/engear2005/Rhonda/102_0575.jpg

roman.GSR
2010-10-30, 11:43 AM
CLEAN BUILD! GLWS

wrestlingandrunning
2010-10-30, 02:00 PM
Nice car, wish it was cheaper.

engear2005
2010-10-30, 02:15 PM
if you are serious shoot me an offer. it is obo

wrestlingandrunning
2010-10-31, 03:56 AM
It's way out of my price range unless you were interested in a trade for a 90 n/a 300zx, even then I don't know.

LowClass
2010-10-31, 08:24 AM
One of the cleanest Civics ive ever seen bump for you.

engear2005
2010-10-31, 11:01 AM
It's way out of my price range unless you were interested in a trade for a 90 n/a 300zx, even then I don't know.

what is your price range?

engear2005
2010-10-31, 11:01 AM
One of the cleanest Civics ive ever seen bump for you.

thanks man.

Broke_Dreams
2010-10-31, 10:44 PM
Amazing!

wrestlingandrunning
2010-11-01, 01:21 AM
what is your price range?

Need to talk to the bank first to see about monthly payments but honestly 7k so I don't see you dropping the price that low unless I get my z sold but glws

engear2005
2010-11-02, 12:42 PM
bump

engear2005
2010-11-03, 04:51 PM
UP

power.plant.f22
2010-11-03, 04:58 PM
beautiful!

91JDMCRXSIB16
2010-11-04, 12:01 AM
that is one clean coupe i wana do the same to my coupe but i wish i had the money glws and clean i bet u turn alot of heads with this car lol

engear2005
2010-11-04, 11:32 AM
I definately do turn alot of heads.

tehECHELON
2010-11-06, 09:26 AM
15k for a converted car? I have 2 legit RHD cars (imported not converted) and they wouldnt even pull that. And my del sol has 3x as much done to it and its all top of the line parts. Reconsider your price and youll get more interest. GLWS

civicek89
2010-11-06, 12:35 PM
15k for a converted car? I have 2 legit RHD cars (imported not converted) and they wouldnt even pull that. And my del sol has 3x as much done to it and its all top of the line parts. Reconsider your price and youll get more interest. GLWS

^^^^ finally

engear2005
2010-11-06, 07:36 PM
someone throw me a real offer. mine isn't stock with lots of bolt ons. I took the car down to unibody and built from ground up. I don't have to sell it. If someone has a real offer and wants to offer it then it is theirs more than likely. I set my price to weed out people wanting to low ball me with 6-8k. I have way more than that in the car not including my labor. I would like to sell it but not get took for it. I am very flexible on price.

Uncle_Willie
2010-11-13, 07:25 AM
15 thousand dollars? Just because you have a ton of money and time in it doesnt mean its worth anything near that. Its only rhd converted and alot of those parts can be picked up off ebay or just picked up used. I honestly would list it for 7k and youd have alot of interest on it. Not trying to bash your thread just saying. GLWS man

engear2005
2010-11-13, 01:10 PM
I have seen cars that aren't half the quality of mine go for at least 10k. yes you can buy parts used for cheaper than buying NEW OEM PARTS. Mine being all new the car will last for years to come not have to replace things after a few years. Car was built for a solid daily driver. as i have said I dont have to sell it so my price isnt 7k. if someone is interested then they can buy it. would be nice to sell but dont have to.

turbo_db8
2010-11-14, 02:58 AM
would u give up just the shell ? u keep your motor and wheels and u can keep everything from the headers to the muffler/

engear2005
2010-11-14, 12:47 PM
how much would you offer for just the shell? I don't have any other wheels to put on it. so you would have to bring some 5 lug wheels

engear2005
2010-11-14, 02:32 PM
new price. maybe it wont scare people and want to bash, since it was OBO. Now the price is $12k

feraldarkness
2010-11-14, 07:36 PM
FFS I could buy a 95 RX7 with ls9 in it for that O o and its book value would be that not 4k lol

engear2005
2010-11-14, 08:45 PM
I would like it for the people who don't like the price to just keep moving on in the forum and not post your 2 cents about the price of my car.

Uncle_Willie
2010-11-16, 10:19 PM
Price aside. Why has the entire front end and rear bumper been replaced? Its been wrecked i assume? :skep:

engear2005
2010-11-17, 06:44 AM
car was never wrecked. when i got it the kid had ugly body kit bumpers, cheap cf hood that was broken and f1 style fenders. that stuff had to go. i bought new honda because nothing fits better than oem.

engear2005
2010-12-02, 03:29 PM
bump

engear2005
2011-01-25, 11:29 AM
bump

blondieinlove22
2011-01-25, 01:53 PM
glws..another car I can't buy but love to look at =P

muha22752
2011-01-25, 06:50 PM
wow thats a sexy car. trade for a eg

engear2005
2011-01-25, 06:53 PM
Sorry no trade for another eg

roat41
2011-01-25, 07:03 PM
Car would be sold if it was resonably priced... I like it alot and would like to have it but i want the best bang for my buck...

engear2005
2011-01-25, 07:33 PM
price is obo. offer up worst I would say is no. I have alot of money in this car and don't have to sell it but would be nice. I see RHD converted integras with stock b series go for 8k. no where near the detail as my car has.

mdh
2011-01-26, 05:15 AM
holy shit... bump for a clean fuckin ride! This is a 93 coupe done RIGHT! ha yes pun intended

engear2005
2011-01-26, 09:22 AM
Thank you! someone sees that other than my family

engear2005
2011-02-07, 10:20 AM
BUMP

Froiwok
2011-02-07, 01:48 PM
Need to talk to the bank first to see about monthly payments but honestly 7k so I don't see you dropping the price that low unless I get my z sold but glws

I'm interested in your Z what are it's specs?

wrestlingandrunning
2011-02-07, 03:08 PM
n/a, 5spd 144,xxx brand new paint job last spring, was wrecked on front end but fixed it.(wrecked on passenger side before i had it, they neglected to tell us but it was fixed) t-tops, new brakes, some other little stuff. Car is no longer mine, but current owner I believe will be trying to sell it soon if your still interested I can talk to him.

engear2005
2011-02-28, 06:13 PM
new price $9k

2KE46
2011-02-28, 06:21 PM
man i love this car ttt


pm'd

Eg6_Lover
2011-02-28, 07:59 PM
interested in a 02 NHBP EP3 the car in my avatar?

Eg6_Lover
2011-02-28, 07:59 PM
Just for Kicks..

engear2005
2011-02-28, 09:36 PM
sorry trying to weed out some cars.

engear2005
2011-07-13, 09:06 AM
STILL FOR SALE

Jameson_g
2011-07-13, 11:54 AM
what is your price range?

$7500

hondatuner
2011-07-13, 02:41 PM
take 8500?

engear2005
2011-07-13, 05:40 PM
REPLIED

engear2005
2011-07-14, 11:33 AM
REPLIED VIA MESSAGE

engear2005
2011-07-16, 06:32 PM
Innovative mounts and cam gears are installed now

engear2005
2011-07-22, 08:59 AM
apparently you guys aren't serious since havent gotten back to me