PDA

View Full Version : Tire Blew


Asphalt Supremacy
2010-12-25, 07:07 AM
My friend and I were out driving around feeling out the new tune on his car. So we would do 40 to 120 pulls (NO it was not snowing at the time), So we were slowing down and then we hit somthing on the highway and then hell instantly broke loose we ended up landing off the highway on a side road that runs along side the highway witch is about 100ft away I still dont remember the wreaking part just the crawling out the window part. I walked away with bruised rids he got a nasty cut on this arm. The police report said they found a 10mm wrench in one of the tires.

http://i850.photobucket.com/albums/ab63/morrisseyb/107.jpg
http://i850.photobucket.com/albums/ab63/morrisseyb/140.jpg
http://i850.photobucket.com/albums/ab63/morrisseyb/145.jpg
http://i850.photobucket.com/albums/ab63/morrisseyb/142.jpg
http://i850.photobucket.com/albums/ab63/morrisseyb/141.jpg

and here is his arm http://i850.photobucket.com/albums/ab63/morrisseyb/brandonarm.jpg

ymisoqt
2010-12-25, 07:19 AM
LOL sorry but the first thing that came to my mind is damn that looks like fun! Glad you guys walked away from that, sucks he wasted money on a new tune then flipped his shit ha

Asphalt Supremacy
2010-12-25, 07:27 AM
Yea we took it back to my shop and pulled the turbo off we just put on and everthing else we could find but the car was trashed. We gave him half the money back on the tune becuase hes a good friend of ours.

ymisoqt
2010-12-25, 07:34 AM
fffuuuu no shit? That was really nice to give back some $ on the tune. Plans for a new build?

Asphalt Supremacy
2010-12-25, 07:41 AM
Yea he got another srt with a built head built bottom and bigger turbo the only thing holding us back is we have to develope a input shaft that wont break after 600hp.

ymisoqt
2010-12-25, 07:52 AM
haha my input shaft went out in June. I was like, burnout! whiiiiiirrrrr FUCK. Replaced it but didn't replace the final drive gear so I'm waiting on my trans to go. You have a place to do a new one or are you working on fab'ing one?

Asphalt Supremacy
2010-12-25, 07:56 AM
Yea we are machining our own in house so we can sell them to the srt4 community. Right now we have a couple of them done we are going throgh the R and D stage.

ymisoqt
2010-12-25, 08:07 AM
I wish my car had aftermarket support like that lol I'm stuck with replace oem shaft, wait for trans to blow hahaha What numbers did he put down with the prev setup?

Asphalt Supremacy
2010-12-25, 08:18 AM
He put down 525hp on stock motor,somewhat a built head,35r,e85,ported intake manifold and 3" exhaust. Yea aftermarket parts for a your car is not there but your delsol it way there lol. But we see the srt being a power house here in the next couple years for parts and people wanting to go fast.

ymisoqt
2010-12-25, 08:25 AM
That's why I bought the sol lol Got tired of paying out the ass for custom shit. I still do it, but I like being able to order online at the whim. btw ur last pm was blank :(

Asphalt Supremacy
2010-12-25, 08:30 AM
i sent another pm. yea i learned that the hard way with my gtp parts were there but only from two companys.

ymisoqt
2010-12-25, 08:32 AM
got it. :) low aftermarket support sucks but it's nice because it pushes me to make stuff myself ;)

grunt2001
2010-12-25, 09:26 AM
DAMN sorry to hear ,hope his ink is cool:cheers:

4drTurbo
2010-12-25, 10:40 AM
Holy shit! Glad you guys made out of that okay!

Thats yet another Neon SRT gone.

Renegade
2010-12-25, 10:41 AM
Wouldn't it suck if you guys got back to the shop, and couldn't find your 10mm wrench? Yea, that would (pardon me), blow.

freekwonder
2010-12-25, 10:47 AM
Damn that sucks. Glad you guys made it out ok though. Metal is replaceable.

Asphalt Supremacy
2010-12-25, 11:38 AM
Wouldn't it suck if you guys got back to the shop, and couldn't find your 10mm wrench? Yea, that would (pardon me), blow.
Lmao yes that would have

05SRT
2010-12-25, 04:01 PM
What kind of shit did you salvage off the car that he is not using? I need some new toys for mine.

Orions96cobra
2010-12-25, 05:25 PM
Yet another srt-4 wrecked. People wonder why the insurance is so damn high on these cars.

Spiffy
2010-12-25, 06:02 PM
Glad to see youre ok! Nasty cut on the arm.











Planning on parting it out? I could use the passenger seat. That is if you didn't shit yourself while that happened.

Asphalt Supremacy
2010-12-25, 07:50 PM
What kind of shit did you salvage off the car that he is not using? I need some new toys for mine.

Injectors,turbo,manifold and some other small things like his small battery. Lol but if I were you I would not buy it we sold the manifold 2 days later the kid got t boned there is sane bad jewjew with these parts.

Karlen
2010-12-26, 12:46 AM
Jesus. Glad to see you guys made it out relatively unharmed. I wouldn't expect a Neon to fare very well in a rollover like that.

inis
2010-12-26, 12:58 AM
Jesus. Glad to see you guys made it out relatively unharmed. I wouldn't expect a Neon to fare very well in a rollover like that.

the previous gen is the one with a-pillar issues.

Gunnar
2010-12-26, 12:59 AM
That cut looks nasty. Glad you guys got out relatively okay.

4drTurbo
2010-12-26, 01:12 AM
Injectors,turbo,manifold and some other small things like his small battery. Lol but if I were you I would not buy it we sold the manifold 2 days later the kid got t boned there is sane bad jewjew with these parts.
:shock:

Asphalt Supremacy
2010-12-26, 06:44 AM
:shock:

Yea that's how I feel

NONOS
2010-12-26, 09:59 AM
Looks like you guys were going 35!:skep: Glad you are ok!:thumbsup:

inis
2010-12-26, 11:19 AM
Looks like you guys were going 35!:skep: Glad you are ok!:thumbsup:

Yep and the tire blew because they hit a curb or something.

xXSTi-lynXx
2010-12-26, 11:25 AM
glad you are both alright, I cheesed when i saw then first photo, at a glance it looked like an dodge intrepid. Then I saw the familiar wheel, and my smile went away.

Asphalt Supremacy
2010-12-26, 07:48 PM
glad you are both alright, I cheesed when i saw then first photo, at a glance it looked like an dodge intrepid. Then I saw the familiar wheel, and my smile went away.

Lol

Dester223
2010-12-27, 09:49 PM
I also thought it was an avenger then I realized what it was after I saw the broken wheel picture.

Looks like a nasty wreck.

05SRT
2010-12-28, 01:12 AM
I wish the wing was still on it. I have not seen a wreck with an SRT that has a wing where the wing was damaged in anyway. Whatever that thing is made of is what cars should be made from. Its fucking indestructible

Asphalt Supremacy
2010-12-28, 01:26 AM
Funny you say that we took the wing off that night before we went out and all of our friends say that, that wing could have changed the out come. I personally don't believe this unless it was a exotic car but idk.

05SRT
2010-12-28, 01:30 AM
I don't know what you mean by changing the outcome. But i will say it is functional. I didn't believe it till i tried it. Granted its minimal. I don't run one personally as i think they are fucking hideous. However, same turn taken with and without, i could feel the ass end start to step out. Granted we are talking 120+ here.

Asphalt Supremacy
2010-12-28, 07:34 PM
Change the outcome for the wreak instead of rolling the car it would have just slide

Albatross
2010-12-29, 01:39 AM
Change the outcome for the wreak instead of rolling the car it would have just slide

I doubt it would of made a difference.

Asphalt Supremacy
2010-12-29, 03:17 AM
See that's what I'm saying lol