PDA

View Full Version : 76 mm turbo, hot side plumbing for turbo F-body


evo462
2011-02-01, 09:08 PM
all sold

Gunnar
2011-02-01, 09:16 PM
Just saw this on Tech, didn't realize you were on here. Did you ever test fit that turbo on that hotside piping? Looks like with the on-center housing it would be even closer to the crank pulley.

evo462
2011-02-01, 09:23 PM
No, the on center turbine housing will not work with it. The T4 flange on the plumbing leans back a little towards the timing cover. With the tang housing on the MPT70 this should allow the radiator and puller fans to stay in the stock location.

NoRotor86
2011-02-01, 10:11 PM
Where are you located?

evo462
2011-02-01, 10:15 PM
Whoops, left that out. Blue Springs MO.

You should drop a turbo V8 into that RX7 of yours :P

Gunnar
2011-02-02, 04:31 AM
Whoops, left that out. Blue Springs MO.

You should drop a turbo V8 into that RX7 of yours :P

It's got a V8 already, but a turbo would probably help get it out of the 12's

evo462
2011-02-03, 09:36 AM
$525 for the hot side plumbing, $475 for the turbo

evo462
2011-02-09, 09:58 AM
Bump

evo462
2011-02-16, 12:00 AM
Hot side sold, turbo still available.

turbo_trucker
2011-02-16, 11:30 AM
hey can you call or text me about the turbo im interested in it 660 833 5040