Hey

[sanman000719]

whats going on in here i hear you guys have a bad ass little crx in the shop up here think we can get some install pix


oh yeah Junc City in the house


whats up Scott

[kcevo]

whats going on in here i hear you guys have a bad ass little crx in the shop up here think we can get some install pix


oh yeah Junc City in the house


whats up Scott

It's coming along very nicely, I'll have someone snap some pics and get them hosted up here shortly. :thumbsup:

[Chance]

is he talking about the one we parted out? :mrgreen: only kidding! :lol2:

Il snap some for you shortly, packing some stuff up for you(chad) and scott then I will head that way and bring a camera. :thumbsup:

[sanman000719]

parted out wtf lol man you know who i got backing me fool dont make me bring Ft Riley up that way haha

[Twisted Image]

Man where these pics at?!

[Chance]

forgot my camera, however they will be up tonight around 630 :thumbsup:

[EG9-ish]

hmm, now its 10:30, they just like making us wait lol

no rush, i'm sure it'll be badass

[Chance]

its def. bad ass lots of bling hasport parts however it may have been too much for my camera to take in, I got the shots and now when I try to load them it gives me a card reading error...to hell with technology, I will try once again tomorrow very sorry for the delay!

[Red_Rocket]

We were out of there early anyways lol so if Chance doesn't do it i'll take pics tommorrow cause I have to go up there and get stuff anyways. See ya their Chance :thumbsup:

[Chance]

I will be there around 11, I have to put my motor in and hopefully get the car back up and running. I was there before scott got back and took pics, I ran to grab ciggs and got back when you were getting there today. :yesnod:

[Red_Rocket]

So u did get pics? if not I'll bring my camara and I'll get dirty and help you tommorrow so it gets running :thumbsup:

[Chance]

yeah I have some just have to get them to load, and tomorrow I will only be working on it from like 12-3 and then after 10 if chad is still down there if not I will have to finish it up next week.

[Red_Rocket]

Dam this thing needs to get done lol well I'll still come down I have to get those parts if there in or not plus I'm going to bug scott lol

[Chance]

what are you getting from us?

[Red_Rocket]

I am getting Banjo Bolts

[EG9-ish]

yo robert, get any details on that d16z6?

chance could probably answer then since he's here, what about it? mileage, condition?

[Red_Rocket]

yo robert, get any details on that d16z6?

chance could probably answer then since he's here, what about it? mileage, condition?
Chance is off I'll ask Scott and Chad tommorrow about it or have Chad Pm the info to u or come up their Scott is a really cool guy to chat with

[EG9-ish]

i'm stuck at work tomorrow till 9, i aint gonna be able to make it, but if you and kia aint busy sunday, maybe we'll swing up there then

[aira]

I would love to take some photos of the MKC cars. :thumbsup:

[Chance]

you mean we have to wash them all :nonod: :lolg: you should come to the dyno day event march 29 and 30th hopefuly we will have all of the cars running and on display (evo, turbo bmw, shop hondas, and then anyone who is there) and it should be a fairly large event, I can get you more information if you would like or in a day or so when I get my reply from EA there will be a few posts around the site advertising it. :thumbsup:

Also what is the question about the single cam?

[Red_Rocket]

you mean we have to wash them all :nonod: :lolg: you should come to the dyno day event march 29 and 30th hopefuly we will have all of the cars running and on display (evo, turbo bmw, shop hondas, and then anyone who is there) and it should be a fairly large event, I can get you more information if you would like or in a day or so when I get my reply from EA there will be a few posts around the site advertising it. :thumbsup:

Also what is the question about the single cam?
He is wanting to buy it I'll find out from scott

[sanman000719]

I was there today and looks good finished up what I owed and paid for exhaust so shouldnt be to long before it is street worthy I hope cause I am missing my ride lol

[Chance]

I finally have my baby back got it all together and drove it home tonight....well yesterday (that being saturday) lol

[Twisted Image]

So how about those pics of car in question? :zzz:

[Chance]

he came down and snapped some pictures of it.

[Twisted Image]

Yea I know, I have those at home. (what he took) But was looking to see if you guys had taken anything.

[kcevo]

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx007.jpg

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx006.jpg

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx005.jpg

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx004.jpg

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx003.jpg

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx002.jpg

http://i55.photobucket.com/albums/g136/kcevo/sanmansstreetcrx001.jpg

[meangreenmachine]

wow! crx's do not have much room at all!

how close is that turbo to the slim fan?

and is that the tomzilla turbo?

[kcevo]

wow! crx's do not have much room at all!

how close is that turbo to the slim fan?

and is that the tomzilla turbo?

No they don't have any room for a large turbo setup like when using the 4" compressor covers.

The setup doesn't come close to the slim line fan at all, but comes real close to the radiator, but the mounts will keep it solid from rocking into it. We did contemplate cutting some of the radiator off and have the end cap re-welded back on to clear more like we've done in the past; but this will only hinder the cooling system, which is tested already going to a half core and putting the I/C in front of it to block all the flow.

Yup that's a Tomzilla, ie 66mm turbonetics non-ball bearing.

[meangreenmachine]

whats the setup in that beast?

[sanman000719]

ty for the pix i am pleased with the way my car has turned out and really didnt mean to sound that upset yesterday it was a bad weekend for me with the tranny in my s10 going out wich built up inb me lol
nothing like being in mexico and ure truck shitting on you

[Chance]

I hate everyone that has tim's welds in their engine bay due to the fact that it makes me want to spend money I don't currently have :nonod: :lol2:

[KansasKev]

Can't wait to see this thing done!

What is the exact set-up?

[Chance]

thats up to the owner to share :mrgreen:

[sanman000719]

would also be kool to see day by day dyno results to end just to show the progression that can be done from tuning. I mean you dont have to by any means ill know them anyways hehe.

also on the exact build well ummmm im not really wanting to display all the particulars about my car, and not to sure scott and the guys do either.

[Chance]

its something that is left up to you which is why I did not post, personally I dont like people (especially people online that i do not know) knowing everything that is done to my car. :thumbsup:

[sanman000719]

well there is the answer thanx man

[MidnightRacer]

i've noticed that when everyone turbo's a CRX they go with the half size radiator. is it possible to go turbo on a CRX and still keep the stock full sized radiator?

[meangreenmachine]

i've noticed that when everyone turbo's a CRX they go with the half size radiator. is it possible to go turbo on a CRX and still keep the stock full sized radiator?

I want to say no, because there will be little to no room.

crx's do not give you alot of room to work with, especially when turbochargin them.....

[Chance]

yep, the halfsize radiator is going to be your best bet, get a nice one and a good fan and it wont be a problem at all. EF's dont have much room at all especially with the b series swap in them. :thumbsup:

[MidnightRacer]

yep, the halfsize radiator is going to be your best bet, get a nice one and a good fan and it wont be a problem at all. EF's dont have much room at all especially with the b series swap in them. :thumbsup:

right now i've got the d16a6 which is a pretty zippy motor but i think eventually i want to put a Y8 head and maybe go turbo

[sanman000719]

well pick up the crx lastight, and i am very pleased with it. Thanx to the whole crew donw at the shop.

final results

351whp/250.9 tq runs like a beast lol

cant wait for the c16 tune