yesSIR
2010-10-10, 05:27 PM
Bought this thinking it'd suffice but I want a bigger center channel. I did hook it up for a movie, so it's had a couple hours of use, but at least you know it works.
Pics of it when i hooked it up...
http://i84.photobucket.com/albums/k24/sa_im_ne/IMG_6150.jpg
http://i84.photobucket.com/albums/k24/sa_im_ne/IMG_6152.jpg
http://i84.photobucket.com/albums/k24/sa_im_ne/IMG_6153.jpg
Specs...
FREQUENCY RESPONSE 67Hz-24KHz 3dB
POWER HANDLING 125W RMS / 500W Peak
SENSITIVITY 96dB @ 2.83V / 1m
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQ CROSSOVER 1600Hz
HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression driver mated to 90 x 60 square Tractrix Horn
LOW FREQUENCY DRIVERS Dual 5.25" (13.3cm) Cerametallic cone woofers
ENCLOSURE TYPE Bass-reflex via dual front-firing ports
INPUTS Single binding posts
HEIGHT 6.5" (16.6cm)
WIDTH 20.5" (52.1cm) DEPTH 10.5" (26.6cm) with grille
MOUNTING Uptilt and Downtilt feet
WEIGHT 22.1lbs (10kg)
FINISHES Black Ash woodgrain vinyl
BUILT FROM 2010
I paid 350, asking 275.
Pics of it when i hooked it up...
http://i84.photobucket.com/albums/k24/sa_im_ne/IMG_6150.jpg
http://i84.photobucket.com/albums/k24/sa_im_ne/IMG_6152.jpg
http://i84.photobucket.com/albums/k24/sa_im_ne/IMG_6153.jpg
Specs...
FREQUENCY RESPONSE 67Hz-24KHz 3dB
POWER HANDLING 125W RMS / 500W Peak
SENSITIVITY 96dB @ 2.83V / 1m
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQ CROSSOVER 1600Hz
HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression driver mated to 90 x 60 square Tractrix Horn
LOW FREQUENCY DRIVERS Dual 5.25" (13.3cm) Cerametallic cone woofers
ENCLOSURE TYPE Bass-reflex via dual front-firing ports
INPUTS Single binding posts
HEIGHT 6.5" (16.6cm)
WIDTH 20.5" (52.1cm) DEPTH 10.5" (26.6cm) with grille
MOUNTING Uptilt and Downtilt feet
WEIGHT 22.1lbs (10kg)
FINISHES Black Ash woodgrain vinyl
BUILT FROM 2010
I paid 350, asking 275.